Produs |
|
Tipul de categorie | Linii de producție complete |
---|---|
Categorie | Board lumber SORTING LINE |
Brand | MOST d.o.o. RAKEK |
Model | MPC-800 |
Specificaţii |
|
Starea articolului | Second Hand |
Data fabricației | 2019 |
Volum | 1 Converteşte |
Descriere |
BOARD LUMBER SORTING LINE FOR SALE
It was custome-made in 2019, in perfect condition and it includes the following: 1. TILTING DESTACKER – 4 FORKS, 4 TONS 2. LONGITUDINAL BELT CONVEYOR FOR STICKERS 3. TRANSVERSE CHAIN CONVEYOR 4. DRIVEN ROLL CONVEYOR WITH TURNING DEVICE 5. CLASSIC UNDER-TABLE PNEUMATIC CROSSCUT SAW 6. DRIVEN ROLL CONVEYOR WITH TRANSVERSE CHAIN 7. DRIVEN SPIRAL ROLL CONVEYOR 8. ELECTRICAL EQUIPMENT 1. TILTING DESTACKER Maximal load capacity: 4 tons Lifting height: cca 1500 mm Nominal fork height – in horisontal position 320 mm The length of the supporting forks: 1300 mm Nuber of the supporting forks: 4 pieces Internal spacing between supporting forks: 3 x 900 mm External spacingbetween supoorting forks: 3000 mm Connection power: 2,2 kW Angle of inclination: 50 degrees Lifting and tilting of the stacks is made by the electric motor reducer with a brake. 2. LONGITUDINAL DRIVEN BELT CONVEYOR Length: 6500 mm The width of the ribbed belt: 300 mm Height 400 +- 50 mm Drive power cca 0,75 kW Speed - cca 60-80 m/min 1 set 3. TRANSVERSE CHAIN CONVEYOR Number of chain branches: 5 pieces Length of the chain branches: cca 2500 mm Arrangement of the chain branches: adapted Height: adapted Speed: adapted cca 20 m/min Engine power: cca 1,0 kW It is used for receiving boards from tilting destacker and turning boards if necessary, as well as for the quality control. 4. DRIVEN ROLL CONVEYOR Length cca 5500 mm Width (length of the cylinders: cca 1000 mm Height: cca 900 mm Speed: 30-60 m/min Engine power: cca 1,5 kW Conveyor is used for receiving boards from the transverse chain conveyor 5. CLASSIC UNDER-TABLE PNEUMATIC CROSSCUT SAW WITH LIFTING AND CIRCULAR RECTILINEAR MOVEMENT OF THE CIRCULAR SAW WITH PRESSURE ASSEMBLY TYPE MPC 800 Power of the main engine: 9,2 kW Diameter of the circular saw: 500 mm Circular saw bore: 30 mm Circumferential speed of the circular saw: 75 m/sec Average time of cutting: approx 2,0-4,0 sec/cutting Suction connection (2 x) – diameter 100 mm + 160 mm Compressed air pressure: 600 000 Pa (6 bar) Compressed air consumption: 24 NI/1. cutting Exhaust air velocity: 30 m/sek Working height (H1) 850 0+- 30 mm Dimensions of the machine: (L x W x H) 940 x2000x1400 mm Weight of the machine: 950 kg Maximal panel cut width for Thickness 25 mm: 800 mm Thickness 50 mm: 780 mm Thickness 100 mm: 600 mm Power on- activation of the cut: two-handed activation Lifting and movement of the circular saw: CIRCULAR – RECTILINEAR Press assembly for fixing the plate at the cut Crosscut saw is used for cross cuting wide boards up to the width 1000 mm 6. DRIVEN ROLL CONVEYOR WITH CROSS DISCHARGE Length: cca 5500 mm Width (length of the cylinders) cca 1000 mm Height: cca 900 mm Speed: 30-60 m/min Engine power: cca. 1,5 kW Conveyor receives boards – squares from the conveyor Ejection rollers are built into the conveyor, which enable the boards to be ejected to the left side Pneumatic execution 7. DRIVEN ROLL CONVEYOR WITH CROSS DISCHARGE Length: cca 5500 mm Width (length of the cylinders): cca 1000 mm Height: cca 900 mm Speed: 30-60 m/min Engine power: cca 1,5 kW Conveyor receives boards – squares from the conveqoe Ejection rollers are built into the conveyor, which enable the boards to be ejected to the left side Pneumatic execution 8. ELECTRICAL EQUIPMENT FOR DRIVE AND CONTROL Includes: electrical cabinets with control buttons, necessary electrical switches, photocells, cables with grommets, cable ducts, STAR-STOP buttons for inclusion and other electrical material necessary for functioning of the equipment. |
Preţ şi condiţii |
|
Prețul | La cerere |
Oferta vizibilă în: | Toată lumea |
Prin înregistrare vă exprimați acordul pentru Termenii și condițiile Fordaq.
Tipul informaţiilor utilizate pentru calcularea ratingului: