Vindem Prese De Asamblat Imatec Nou Italia

  • Oferta
    18301765
  • Data
    2021-06-08
  • Valabil pana:
    Permanent

Produs

Tipul de categorie Prese
Categorie Prese De Asamblat
Brand Imatec

Specificaţii

Starea articolului Nou
Data fabricației 2020
Volumul 1
Descriere SEMI AUTOMATIC FINGER-JOINT System Brand Imatec
WIth sound proof cabine
Composed as follow: :

Tenoning machine with gluing unit
Entrance in the Press
Press
Tools group

TECHNOLOGICAL DETAILS:

Entrance wood: length mm min 150 max 700
width mm min 30 max 150
thickness mm min 15 max 60
Working height mm max 150
Dimensions of working wood mm max 150 x 60
Exit wood: length mm max 6000

MOTORIZED LOADING CONVEYOR
Conveyor used for the preparation of the parcel composed by the pieces of wood which must be worked on Tenoning machine
Vertical and later stop of the wood parcel with oleodinamic pistons
After the first cycle of tenoning machine, a particular dispositive moves the wood parcel from the working field of mill, in this way is possible the back stroke of cart:
- lenght mm 700
- width mm 550
- motor power kW 0,37

TENONING MACHINE completed with:
- starting hydraulic carriage with speed which can be programmed.
- n° 1 inferior scoring unit for a perfet horizontal joint – suggested for vertical joint.
- n° 1 top scoring unit for a perfect horizontal joint.
- n° 1 end cut off blade to cut the wood parcel.
- n° 1 mill shaft for tenoning work.
Automatic axial movement of shaft between the first and second working cycle:
- Motor of inferior scoring unit kW 0,73
- Motor of top scoring unit kW 0,73
- Motor of end cut off blade kW 4
- Motor of mill shaft kW 11
- Hydraulic panel
- PLC Siemens System
- Suction hole n°2 Ø mm 100 – n°2 Ø mm 150

AUOMATIC GLUEING Machine with serrated rollers
- Automatic Glueing machine with serrated rollers. After the second milling process, the PLC orders the operation of the glueing roller.
- Glueing roller in steel

INTRODUCTION SYSTEM IN THE PRESS

Conveyor used for the preparation of the parcel composed by the pieces of wood which must be worked on Press machine
- Belt mm 500 x 200 with motor KW 0,50
- Hopper for piece storage
- Motorized rollers top and bottom Ø 150
- Entrance and exit of the pneumatic roller for upper pressure

HYDRAULIC UNIT

- motor kw 1,5

PRESS mm 6000
Automatic Press with composition station separated from the pressing station.
Thanks to this technical solution, we can optimize the time and avoid the un-working time.
Completed with:
- automatic loading for pieces while a motorized conveyor advance them into the “stop and go” type
- cut of jointed wood bar with a lower cut-off machine max mm 150x60
- manual insertion of pieces
- automatic composition of wood bar and automatic unloading
Technical details :
- Motor of enter conveyor kW 0,73
- Blade motor of cut-off machine kW 0,73
- Hydraulic system kw 2,2
- diameter of blade Ø 350 Z84
- Rotation speed 5000 rpm
- Ø aspiration hole 100

AUTOMATIC UNLOADING OF THE WOOD PARCEL
- Motorized unloading rollers. After the completed working cycle, the motorized rollers moves the wood parcel to the unloading..
The man with his hands moves the wood parcel at the beginning of Press.
Techinical details:
- lenght mm 700
- width mm 550
- motor power kW 0,37

PRODUCTION OF THE SYSTEM:
Mid-range length of the beginning piece of wood mm 90 x 25 x 500 mm
Exit wood bar length mm 6.000
Production = around 5.400 linear mt = 12 m3 in 8 working hours

Mid-range length of the beginning piece of wood mm 50 x 25 x 500 mm
Exit wood bar length mm 6.000
Production = around 5.400 linear mt = 6,5 m3 in 8 working hours

Preţ şi condiţii

Prețul Cereți oferta de preț
Oferta vizibilă în: Toată lumea

Vanzator

Confirm că am citit și înțeles Declarația de confidențialitate a Fordaq

Prin înregistrare vă exprimați acordul pentru Termenii și condițiile Fordaq.