Producție

  • Oferta
    18254211
  • Data
    2020-05-14
  • Valabil pana:
    2020-11-10

Produs

Tip Producție

Specificaţii

Descriere The profiling profile quality control system detects non-blown surfaces and measures the depth of the unprocessed surface. The system uses methods of digital image analysis. Depending on the width of the surface to be tested and the type of material, the system detects areas not shaded from 50 mm to 20 mm in width. In the case of measuring the depth of the undeployed area, effective loss detection starts from 0.3 mm deep. The system can be used as a quality control tool directly behind the planer or rotor. The material scanning speed can be up to 120 m / min. ProfiMeter also provides optimization of the planing process on a system of several rotoles with different thickness of work. The aim of the optimization is to obtain a planed board with the smallest possible material loss. - Translated with google

Preţ şi condiţii

Prețul Cereți oferta de preț
Oferta vizibilă în: Asia, Europa

Vanzator

Confirm că am citit și înțeles Declarația de confidențialitate a Fordaq

Prin înregistrare vă exprimați acordul pentru Termenii și condițiile Fordaq.


Anunțuri similare